Channel Lock? Ch FIRST Mentor and Systems Engineer <<-- Searching.... Systems Integration & Analysis - Requirements Analysis - Documentation - Leadership www.linkedin.com/in/carlghansen ******************************************************************************* Date: Sat, 4 Jan 2014 16:15:52 -0600 From: JRodgers <jrodgers113@GMAIL.COM> Subject: 88 GL - Oil Cooler R&R I am almost ready to remove the cooler after my big oil leak. Have new O-ring, new filter and oil ready to go, and an exquisite 3/8 internal pipe wrench. Question:: Does the big nut threaded on the pipe though the oil cooler have to come off before the pipe itself can be backed out? Or is the nut there just to set the position of the cooler on the pipe? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.