Date: Mon, 6 Jan 2014 21:27:01 -0800
Reply-To: Neil N <musomuso@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Neil N <musomuso@GMAIL.COM>
Subject: Re: Used Radiator Inspection?
In-Reply-To: <97B984D3-3883-41DE-A43F-6A8A1EFCB584@shaw.ca>
Content-Type: text/plain; charset=UTF-8
yes. This is what I was anticipating. Drilling holes on a SS tube
would be tough. Especially for a novice like me!
And for sure. Wondered about using aluminum. I wonder why the likes of
GW didn't do same?
On 1/6/14, Alistair Bell <albell@shaw.ca> wrote:
> The welding is not the hard part of this playtime, what would give you some
> fun is cutting the birds mouths and corresponding holes in the tubing.
> Neil, why not use aluminum to make the tower? Easier material to work with
> and you got plenty of aluminum in the cooling system already.
>
> Alistair
>
>
>
>> On Jan 6, 2014, at 7:00 PM, "SDF ( Scott Daniel Foss )"
>> <scottdaniel@TURBOVANS.COM> wrote:
>>
>> people fabricate assemblies out of stainless steel quite commonly.
>> more welding than drilling for sure ..
>> but many custom parts are tig welded up in stainless.
>>
>> my welder fabricator guy ..
>> making one of those would be child's play for him.
>>
>>> On 1/6/2014 4:38 PM, Neil N wrote:
>>> Interesting. Looks similar to the stamp on the heat exchange box
>>> behind dash. Good tips. Thanks. A manufacture and assembly date.
>>>
>>> As for a stainless steel coolant distribution tower, uh no. That metal
>>> would be a PITA for someone w/o the right tools. Metal's too hard.
>>> Maybe use mild box steel? Easier to drill and mate the pipes to it.
>>>
>>> Neil.
>>>
>>>
>>>> On 1/6/14, mark drillock <mdrillock@cox.net> wrote:
>>>>
>>>> That date looks ok to me. The newest van is 22 years old. That rad is
>>>> only 10 years and it may have been on the shelf for a while before it
>>>> was ever installed.
>>>>
>>>> In addition to that label with a full date there is a molded in date on
>>>> the plastic side tank near the bleeder.
>>>>
>>>> Mark
>>>>
>>>>
>>>> Neil N wrote:
>>>>> https://lh4.googleusercontent.com/-ZOo3U-FfYfs/UssYRGTEYJI/AAAAAAAAIuM/7kc-Jv5RzuQ/s800/rad%2520date.jpg
>>>
>>> --
>>> Neil n
>>>
>>> Blog: tubaneil.blogspot.ca
>>>
>>> '88 Westy http://tinyurl.com/c8rlw6p
>>>
>>> '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/
>>>
>>> Vanagon VAG *Gas* inline-VR Engine Swap Group:
>>>
>>> http://tinyurl.com/d7gd5ej
>>>
>
--
Neil n
Blog: tubaneil.blogspot.ca
'88 Westy http://tinyurl.com/c8rlw6p
'81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/
Vanagon VAG *Gas* inline-VR Engine Swap Group:
http://tinyurl.com/d7gd5ej