Date: Tue, 21 Jan 2014 23:54:15 -0500
Reply-To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject: Re: Soliciting VW Engine Recommendations
In-Reply-To: <52DF3748.3070103@turbovans.com>
Content-Type: text/plain; charset="utf-8"
I am very familiar and a big fan of CIS or CIS/E, (O2 sensor). Any of these systems have a lot of opportunity for engine enhancements. Very simply as the engine sucks more air you get more fuel. The downsides of this system is that it is easily damaged by dirt or moisture in the fuel, some parts are expensive, and few know how to fix it. A fuel pressure gauge and valve set are more important than a multi-meter. The death kneel for these systems was emissions requirements and the issues with intake valve deposits and valve guide wear. The major disadvantages was the inability to turn the injectors off when the engine was being overrun and for the CIS-E to respond fast enough to O2 sensor input. My 88 fox has the CIS-E, I had a 560SEL with it and countless other VW's including a 79 Sirocco, and 81 Rabbit convertible.
Dennis
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of SDF ( Scott Daniel Foss )
Sent: Tuesday, January 21, 2014 10:13 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Soliciting VW Engine Recommendations
I don't know of anyone who swears by CIS.
No one at all familiar with vanagon engine installations would suggest a transverse installation.
I still can't see Bretts with an inline 4.
the fastest/least expensive routes to a viable engine again are...
good used,
or rebuilt 1.9 or 2.1 waterboxer long block.
that's the goal .right ? ..running again ..
and the most cost effective good solution.
an engine conversion is not really a smart proposition for her, unless there's a spare $ 6,000 to 10K laying around.
Digijet and Digifant waterboxer EFI systems are both fine.
Each has advantages the other system doesn't have.
They're both good.
On 1/21/2014 4:40 PM, Neil N wrote:
> It seems the most common VW gas inline engine is a 2.0 block with 1.8
> 8V head. Doing this on a 2.1 WBX Vanagon allows one to keep some of
> the 2.1 parts. (air cleaner etc.) With Digijet, how many, if any,
> components could one keep? Air cleaner? AFM? FP, ECU relays?
>
> Engine mounted inline with vehicle is all I've ever seen. A transverse
> mount would require some serious fabrication. Not sure why someone
> would attempt this! ;)
>
> You will get varying opinions on which engine management is best. eg.
> some (few?) swear by CIS. Digifant is pretty common. I'm running
> Motronic (as c/w the engine I installed)
>
> Installing a "stock" 2.0 means lowering the drivetrain a fair amount
> to avoid having a bump in the engine lid from the "crossflow" intake
> manifold. This is why most use the 1.8 8V head. It has a "counterflow"
> intake which puts it on the low side of the engine, engine mounted @
> 50ยบ
>
> Here's a page I put together with links to various related projects:
>
> https://sites.google.com/site/t2t3vaggasengineswaps/home/t2-t3-engine-
> swap-links
>
> On 1/21/14, C B <cunegonde.van.westfalia@gmail.com> wrote:
>
>> Which inline-4 *VW* engines are most suited for my '83.5 Westfalia?
>> Displacement?
>> Fore'n'aft or transverse?
>> Best years?
>> Preferred EFI systems?
>