If the Vanagon is 86 and newer the wiring for the cluster is the same whether it came with a tach or a big clock. You can switch 86+ clusters back and forth between tach and clock types without adding or changing wires. Mark > > > most '85-'86 westy weekenders didn't have tachs.. usually the '87's did. > > anyway, you may be lucky and find that your plug is already pre-wired for > the tach cluster.. > > if it isnt, then you will need to swap some pins around in the plug and run > a wire back to the coil. it should be in the archives... ive done it > before several times. did the same thing to my '85 doka which had no tach. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.