Date:         Thu, 6 Feb 2014 01:28:40 +0000
Reply-To:     J Stewart <fonman4277@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         J Stewart <fonman4277@COMCAST.NET>
Subject:      Re: Cleaning/Checking Cylinder Head Question Follow Up
Comments: To: "SDF ( Scott Daniel Foss )" <scottdaniel@turbovans.com>
In-Reply-To:  <52F2D96C.4020901@turbovans.com>
Content-Type: text/plain; charset=utf-8

Thank you Scott. Yes attention to detail, and I am a fanatic on that which is why weekend projects turn into multi-weekend projects. Years ago I swapped out a rusted front axle beam on a '77 Westy (in otherwise great condition, but the beam was Swiss cheese) It took me 5 weekends because I kept finding more "Well as long as I've gone this far, I might as well replace this too" and every weekend I'd place another order with a vendor for more parts. I'm sure this job will be the same! Jeff Stewart ----- Original Message -----
> ah ha...
> the magnifying comment shows that if it's my comment on that you're
> referring to ..at least you read it and comprehended.
> I'm pretty sure I mentioned old tooth brush and spray carb cleaner..
> on newspapers ..........as a low tech very effective cleaning method.
> sure works for me ...perhaps a bit labor intenstive compared to some
> other fancy method ..
> I think good hard work is a good thing ..
> so never bothered me to spent say half an hour cleaning a part like a
> cylinder head by hand.
> heads off in the van :
> it's all about Patience..
> and Attention to Detail...
> and not busting rusted exhaust studs and bolts off..
> and Patience..and Attention to Detail ...
> and Patience..
> and Attention to Detail ...
> and Patience..
> and Attention to Detail ...
> and Patience..
> and Attention to Detail ...
> and Patience..
> and Attention to Detail ...
> and Patience..
> and Attention to Detail ...
> and Patience..
> and Attention to Detail ...
> etc.