Give them a good whack with a hammer and then visegrips. Replace with good grade hex bolt or allen bolt. The sheared off heads were to slow down potential thieves. Mark Cunegonde wrote: > In process of removing the dash ("instrument panel" Bentley 70.6). Conical upper steering column bracket shear bolts have to be drilled out, or can they be backed out and replaced with fresh for reassembly? > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.