Makes me think that spacers and center bored have to be dealt with. But what about the bolts? On Feb 18, 2014, at 2:38 PM, Stephen Grisanti <bike2vcu@YAHOO.COM> wrote: Here's a set of EV 16" steelies on CL locally and he gave the measurements that make me think these are not optimal for a Vanagon. http://washingtondc.craigslist.org/nva/pts/4318001017.html "Up for sale is this set of four factory VW Eurovan steel wheels. Overall in great shape, no bends or cracks. They are 16x6 et 53, 5x112 bolt pattern. These will work on a Vanagon as we'll with minor work. As shown in the picture, I'm including one center cap. Local pickup preferred, but will ship at buyers expense." Stephen
On Tuesday, February 18, 2014 12:53 PM, Ralph Meyermann <ralphmeyermann@GMAIL.COM> wrote: I seen a set of 4 alloys for sale on eBay for about 350.00 and thought about them Velma 82 1.9L AAZ td westy > On Feb 18, 2014 11:37 AM, "OlRivrRat" <OlRivrRat@comcast.net> wrote: > > I would suspect that that would depend on the Style & Width of the wheel ~ The E'V'15" Steelys that I have are 15x6 ET44 & I do have > > 1/2In Spacers on the Front & 3/4In Spacers on the Rear but I was thinking I had done that so as to MakeRoom for the LargeTires that I run > > ( 225/60r15 Front & 235/75r15 Rear) & the BigBrakes I have on the Front ~ But I mounted those Wheels almost 6yrs ago so I don't remember > > if the Spacers were needed for a WheelClearance issue ~ ORR ~ DeanB > > >> On 18 Feb , 2014, at 6:35 AM, Stephen Grisanti wrote: >> >> The EV wheels may also require spacers. I think the EV ET measurement is about 50 versus the Vanagon ET of 30 or so, suggesting the need for 20mm spacers to position the wheel properly. >> >> Stephen >> >> >> On Tuesday, February 18, 2014 1:05 AM, OlRivrRat <OlRivrRat@COMCAST.NET> wrote: >> The BoltPattern is the same but the CenterHolt may need to be BoredOut ~ I have E'V'15" Steelys on my 90Westy >> >> & they needed to be Bored ~ ORR ~ DeanB >> >> >>> On 17 Feb , 2014, at 6:32 PM, Ralph Meyermann wrote: >>> >>> Hi, me again! Got a question, will eurovan wheels fit my westy? Been busy >>> wheel shopping and trying to find something a little more flashy than >>> straight vanagon alloys. >>> Velma 82 1.9L AAZ td westy >> >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.