Date: Fri, 21 Feb 2014 14:01:46 -0500
Reply-To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject: Re: ..... Can't get first or second gear.
In-Reply-To: <CACK29cn1VRbbox8gD+i0r4TK4tMiRrS50SLqwcU+P5SJ9+383A@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"
A fine adjustment can also be made by loosening the plate on the
transmission and moving it sided to side and re-tightening. Has the effect
of ~1/2 a spline.
Dennis
From: Steven Shelton [mailto:shelton4@gmail.com]
Sent: Friday, February 21, 2014 9:49 AM
To: Dennis Haynes
Cc: vanagon@gerry.vanagon.com
Subject: Re: ..... Can't get first or second gear.
I had a similar problem and fixed it out by rotating the spline in the shift
rod. There's a throw measurement in Bentley but there's so much slop in the
movement it's easier to make slight adjustments and then test it.
On Fri, Feb 21, 2014 at 8:41 AM, Dennis Haynes <d23haynes57@hotmail.com>
wrote:
Adjusting the plate under the shifter won't help much. If the 1/2 gear gate
is not lining up the problem is worn bushings. You can adjust for this . The
adjustment is done by rotating the connection on the shift rod. This a
tricky sensitive adjustment. See the Bentley.
Dennis,
From my phone.
________________________________
From: ANTONY MARSH<mailto:apetermarsh@ME.COM>
Sent: 2/21/2014 7:04 AM
To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM>
Subject: Re: ..... Can't get first or second gear.
Thanks Guys. Will quickly check hydraulics and adjustable plate under gear
stick this morning and the agony will be over.
And yes I can get it into third and fourth very easily, and no I can't find
first or second further over towards reverse.
Peter
Sent from my iPad
> On Feb 20, 2014, at 8:02 PM, Bruce Todd <beeceetee@GMAIL.COM> wrote:
>
> Can you get your van it into 1st gear by shifting the gear shift lever
> closer to the reverse position - far left? If so the shift rod / lever /
> linkage is possibly broken. Can you find third?
>
> Bruce
>
>
>> On Thu, Feb 20, 2014 at 12:39 PM, ANTONY MARSH <apetermarsh@me.com>
wrote:
>>
>> Dear List,
>>
>> Does this mean the transmission needs to be rebuilt or is there some
>> devious trick to making it work again?
>>
>> As I was about to reverse out of the drive I had difficulty getting the
>> van into reverse. Like I hadn't depressed my clutch enough. Eventually
>> managed to get moving and all was well. Now the old van will NOT allow
me
>> to find reverse, first or second gears.
>>
>> Suggestions please - be kind.
>>
>> Regards
>> Peter Marsh
>> Naples FL
>> 1991 Tin top.