Date:         Fri, 28 Feb 2014 09:12:30 -0800
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Helpful tool for canvas replacement
Content-Type: text/plain; charset="US-ASCII"

I found this little screwdriver to be very useful:
http://www.homedepot.com/p/Ryobi-TEK4-4-Volt-Screwdriver-HP53LK/202351930
Use a new small Phillips bit and put the screws in a magnetic tray!



Those of you with the early versions stapled to the top have my sympathy.
You need a pneumatic stapler or might just want to remove the top and work
with it on sawhorses.



The three window version is the best mod you can make to your Westy IMHO.



Stuart

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.