Date:         Sat, 1 Mar 2014 09:47:42 -0500
Reply-To:     Steven Shelton <shelton4@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Shelton <shelton4@GMAIL.COM>
Subject:      Fuel Injector Terminal Check
Content-Type: text/plain; charset=ISO-8859-1

I had a no-start problem that corrected itself.  I'm going through and
checking what I can to see if there is anything out of spec that may tell
me what happened so I don't get stranded 500 miles from home.

I checked the resistance of the electrical plugs at the fuel injectors.
 All four were 8.1 ohms.  According to a ProTraining manual i have, it
should be 14-18 ohms.  It's interesting that they are exactly 1/2 of what
they should be.  I'm not sure what this means and the manual doesn't say
what to do if the resistance isn't within range.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.