I have installed the upper ball joint spacers from GW, they seem to be nicely machined. Velma 82 1.9L AAZ TD Westy On Mar 10, 2014 8:21 PM, "Dennis Haynes" <d23haynes57@hotmail.com> wrote: > Give them some time, they will settle a little bit. Extending the shocks > will put the ball joints beyond the angles they can handle. GoWesty sells a > spacer for the upper ball joint. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Ralph Meyermann > Sent: Monday, March 10, 2014 8:28 PM > To: vanagon@GERRY.VANAGON.COM > Subject: G.W. 1.5" lift springs > > Hi Volks! By any chance has any of the list installed the 1.5" springs from > GW? Just finished mine, the rear was done before the frozen pizza was > cooked > in the oven. The fronts, not so much! Thinking the shocks may be a bit too > short of up stroke now. Any suggestions? > > Velma 82 1.9L AAZ TD Westy > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.