Date:         Mon, 10 Mar 2014 20:23:28 -0500
Reply-To:     Ralph Meyermann <ralphmeyermann@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ralph Meyermann <ralphmeyermann@GMAIL.COM>
Subject:      Re: G.W. 1.5" lift springs
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY179-DS634FC4280E6E2231FD3FEA0770@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1

I have installed the upper ball joint spacers from GW, they seem to be
nicely machined.

Velma 82 1.9L AAZ TD Westy
On Mar 10, 2014 8:21 PM, "Dennis Haynes" <d23haynes57@hotmail.com> wrote:

> Give them some time, they will settle a little bit. Extending the shocks
> will put the ball joints beyond the angles they can handle. GoWesty sells a
> spacer for the upper ball joint.
>
> Dennis
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Ralph Meyermann
> Sent: Monday, March 10, 2014 8:28 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: G.W. 1.5" lift springs
>
> Hi Volks! By any chance has any of the list installed the 1.5" springs from
> GW? Just finished mine, the rear was done before the frozen pizza was
> cooked
> in the oven. The fronts, not so much! Thinking the shocks may be a bit too
> short of up stroke now. Any suggestions?
>
> Velma 82 1.9L AAZ TD Westy
>