Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2014, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 10 Mar 2014 13:13:12 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Fuel Expansion Tank: Cracks, Grommet. PICS
In-Reply-To:  <CAB2Rwfigzaj0wxOFGyb0tK9z8WwokTthb3m3rKjP_m6zf9ESVg@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

sorry for all the emails.

re: "Automotive Goop". Since I threaded the bleeder screw into the snapped off nipple hole, and since I applied Goop to exterior, it might be ok for limited exposure to gasoline but who knows?

Neil.

http://eclecticproducts.com/_tds/automotive.pdf

SOLVENTS THAT DISSOLVE AMAZING GOOP®

"...... Gasoline ...... These are common solvents that dissolve AMAZING GOOP® when hardened samples were immersed. The dissolution with these solvents was not instantaneous and therefore does not preclude usage in all cases. Applications were an occasional splash or brief exposure is expected may be acceptable. Test a small area before full use. "

On 3/10/14, Neil N <musomuso@gmail.com> wrote: > Hi all. > > As I was advised, inspected both expansion tanks. Pass. side tank > grommet had held ok with epoxy. But the driver side, well ..... > (image): > > http://tinyurl.com/okz6jt8 Obviously not an acceptable repair or > really even a repair for that matter. This was done earlier in my > Vanagon "career". > > More here showing crazing and crack. > > https://picasaweb.google.com/musomuso/VanagonGasEVAP > > You really have to look close and carefully push on the plastic to > inspect. The area that shows crazing was quite soft. (wear from water > off tire?) > > Thankfully I have a spare tank though it's been repaired with a brake > bleeder and Goop. It will be replaced post haste. > > Enjoy! > > Neil. > > -- > Neil n > > Blog: tubaneil.blogspot.ca > > '88 Westy http://tinyurl.com/c8rlw6p > > '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ > > Vanagon VAG *Gas* inline-VR Engine Swap Group: > > http://tinyurl.com/d7gd5ej >

-- Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.