Rust in Mesa AZ??? Are you sure it's the channel? That's an odd place to rust away unless it's the whole rocker panel gone. The seals usually just rip off, leaving the other edge of the seal in the channel. Good luck! Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Scott Greiner Sent: Saturday, March 22, 2014 1:53 PM To: vanagon@GERRY.VANAGON.COM Subject: Sling Door Seal Channel on chassis - Photo needed! My slinging door seal was hanging down. It appears that the chassis channel rusted away. Does anyone or can anyone send a photo of this area if someone has there seal removed? Planning on welding in a repair piece of material. Thanks in advance, Scott Greiner Mesa, AZ 1982 Westy w/ahu motor |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.