Date:         Sat, 22 Mar 2014 20:34:28 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Front door panels, cloth, silver trim
Comments: To: Marc Perdue <mcperdue@GMAIL.COM>
In-Reply-To:  <CAEwp_cTq+_rX2qUhyeNvJdq0adjgMjn9dfTWv0afTS9QQAp38g@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

I got some panels from Sew Fine. Yes the strips are available. They will
also make custom stuff. Speaker cut outs or not. Just give them a call. You
do need to get there clips. They are also a little more plush tan stock I
did the Dynamat light to replace the plastic "curtains". What difference
noise wise. As is also did the outer skins the door even close differently.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Marc Perdue
Sent: Saturday, March 22, 2014 7:55 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Front door panels, cloth, silver trim

Hey all,

Is it possible to get door panel replacements for the front doors of an '87
Westy 2.1L, gray? I have a couple that I got from Bus Depot years back that
are the all vinyl ones, not the ones with the fuzzy strip and the silver
plastic strip, which is what I currently have. There seems to be a part
number on them, 255 867 056, but I can't find that anywhere searching for
the part number.

In addition, what do you do to replace the plastic seal behind the panel
when it's brittle, cracked, and leaking?

Thanks,
Marc