Date:         Sun, 23 Mar 2014 16:37:39 -0700
Reply-To:     Zeitgeist <gruengeist@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zeitgeist <gruengeist@GMAIL.COM>
Subject:      Syncro Powerflex UCA bushings
Content-Type: text/plain; charset=ISO-8859-1

Have any off you installed these before?  I'm specifically interested in
how you got the  spacing sorted between the inner sleeve and eccentrics.
The RS appears to be just fine with the factory 5.5mm eccentrics, but the
LS has both 5.5 and 5.0mm versions, and the gap between the inner sleeve
and bushing is like 6mm.  I could grind a few mms off of the inner sleeve
or buy 4mm eccentrics, though I'm a little leery of permanently altering
part of a $260 item.  I'm just not sure the new eccentrics will make up the
gap.  Thoughts?

--
Casey

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.