For the list's sharper minds than mine: I'm getting full fresh air flow through the passenger side dash vent, but almost none out of the driver's side. Pulled the flex tube off the heater box/blower, and no air flow there either. I had to patch things back up, and now need to make the vent work. My Bentley does not have a section on the heating system, though it does have a bunch on air-cooled and a bit on diesel heat. I'm anticipating removing the instrument cluster, pulling the flex hose, and finding something to dig around inside the heater box outflow tube. Anyone have any hints or gotchas on doing this? Should I expect to find a rodent in there (no smells)? Karl Wolz |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.