Date: Mon, 14 Apr 2014 18:59:06 -0700
Reply-To: Don Hanson <dhanson928@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Don Hanson <dhanson928@GMAIL.COM>
Subject: Re: Vanagon Head Leaking Around The Head Nut(S)
In-Reply-To: <BAY407-EAS151547D71C3171EEAAC3FC8A0510@phx.gbl>
Content-Type: text/plain; charset=UTF-8
Jeff since you have the parts for an inline install, I'd say quit
messing with the WBX and just do the inline. If you use the 1.8 lite
motor with Digifant engine management you don't have to mess with much at
all...Everything is pretty much the same between those inlines and the WBX.
You can probably find one for about $200...and then you won't have these
ongoing issues with leaks and stuff. I got my van with a 92 rabbit/jetta
1.8 liter motor and was happy with that ...probably the same HP as the WBX
motor and no leaky....
After a couple of years when I found a good deal on an ABA. ($300
complete) I kept the head and Digifant and bolted that onto the ABA 2.0
liter block. Many say this hybrid motor is just as good as an ABA
complete...I don't know about that but it works great and it's dead-nuts
simple...I don't need the ABA OBD stuff, nor did I want to mess with
swapping all the electronics and building a bump to clear the manifold...
Took me about 3/4 of one day to swap that motor into my van rather than
the 1.8...It is more powerful than the 1.8...
You said you thought you'd done everything just right and very carefully
and you still leak now..Why take the chance that that same scenario won't
replay next time? Get a Rabbit and stuff that in there with your already
in hand diesel parts....
|
Back to: Top of message | Previous page | Main VANAGON page
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives
@ gerry.vanagon.com
The vanagon mailing list archives are copyright (c)
1994-2011, and may not be reproduced without the
express written permission of the list administrators.
Posting messages to this mailing list grants
a license to the mailing list administrators to reproduce
the message in a compilation, either printed or electronic.
All compilations will be not-for-profit, with any excess
proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively
towards the management and operation of the Vanagon mailing
list and vanagon mailing list web site.