Date:         Wed, 9 Apr 2014 01:51:56 -1000
Reply-To:     "SDF ( Scott Daniel Foss )" <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "SDF ( Scott Daniel Foss )" <scottdaniel@TURBOVANS.COM>
Organization: Cosmic Reminders
Subject:      Re: Dennis has a question-Carbureted 1.9L engine!
Comments: To: Rocket J Squirrel <camping.elliott@GMAIL.COM>
In-Reply-To:  <53435078.9030302@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

fwiw ..
as far as I know..
the external dimensions of both 1.9 and 2.1 waterboxer engines are
identical.
I have mounted all compoenents from either onto both ,
including intake manfold runners and plenum.

I'd say you can't mix 1.9 intake runners with a 2.1 plenum that easily ..
but either entire intake manifold with fit on either block.

I can't imagine that the long blocks are different depending on carbed
or injected. That just wouldn't make sense.


On 4/7/2014 3:27 PM, Rocket J Squirrel wrote:
> Dennis is not allowed to have questions. Dennis knows all, sees all.
>
> That is, well, all.
>
> --
> Jack "Rocket j Squirrel" Elliott
> 1984 Westfalia, auto trans,
> Bend, Ore.
>
> On 04/07/2014 05:01 PM, Dennis Haynes wrote:
>> Does anyone know if the intake manifold from a European carbureted 1.9
>> engine will fit on the later 2.1L cases? Someone threw a rod on their
>> engine
>> noted above and they need to get the van onto a container back to
>> home on
>> Friday. I have some 2.1 engines OK to go but not a 1.9. I know the
>> manifold
>> center sections are different for the 1.9 and 2.1 or even the factory
>> reman
>> 1.9. I have not dealt with the carb versions yet.
>>
>>
>>
>> Thank you,
>>
>> Dennis
>>
>