I removed the head shields for some work I'm doing on my 1.9L. Each is bolted at one corner with an exhaust header bolt; the passenger side shield is bolted at the front of the engine and the driver's side shield at the rear of the engine. I didn't notice when I was removing the bolts but the only bolts I have left that should go on the headers are two different lengths, one about 30 mm and the other about 25 mm. does anyone know which bolt goes on which header? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.