Anyone know anything about speed sensor failures? I have a VW 3-wire sensor in the back of my speedo that (via a Dakota Digital box) gives (or gave) my 2.5 Subaru ECU the exact speed, and my cruise control, too. (2000 or 2001 AT ECU) It suddenly failed. That is, it was working one day and not the next. I noticed 0MPH on my ScanGauge. I checked all the wiring, connections, etc, back to the sensor and found everything was OK. I looked for a signal from the sensor with my multimeter, using both AC and DC settings, but nothing. I think the sensor just failed. I removed it and tapped it on the countertop, and reinstalled, but nothing. Anyone know about this? Does it happen? Is there a life of these sensors, etc? I'm heading to Duvall on Wednesday, apparently with no speed info to the ecu and no cruise control. :-( Richard Boulder |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.