Date:         Tue, 15 Apr 2014 08:56:43 -0400
Reply-To:     Steven Shelton <shelton4@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Shelton <shelton4@GMAIL.COM>
Subject:      Head Shield Bolts
Content-Type: text/plain; charset=UTF-8

I removed the head shields for some work I'm doing on my 1.9L.  Each is
bolted at one corner with an exhaust header bolt; the passenger side shield
is bolted at the front of the engine and the driver's side shield at the
rear of the engine.  I didn't notice when I was removing the bolts but the
only bolts I have left that should go on the headers are two different
lengths, one about 30 mm and the other about 25 mm.  does anyone know which
bolt goes on which header?

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.