I think the two screws on the sides of the cabinet need to come out too, but I don’t remember. Once it's all unscrewed, push down a bit and pull the bottom edge towards you away from the cabinet. The top edge is in a groove under the top of the cabinet. Tip it out and pull it down. Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of thewestyman Sent: Saturday, April 26, 2014 3:15 PM To: vanagon@GERRY.VANAGON.COM Subject: How to remove the .... Hi to all, I am trying to remove the kitchen units face plate. It’s rusty and needs to be repainted. I took out the three little screws at the bottom, but I can’t find the way how it may come off from under the stainless platform. Anyone knows this? Zoltan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.