Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2014, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 3 May 2014 06:57:23 -0700
Reply-To:     Don Hanson <dhanson928@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hanson <dhanson928@GMAIL.COM>
Subject:      Re: Random Thoughts on Vanagon Maintenance
Comments: To: Tom Hargrave <thargrav@hiwaay.net>
In-Reply-To:  <1a5d01cf6689$dd2bed70$9783c850$@hiwaay.net>
Content-Type: text/plain; charset=UTF-8

On Fri, May 2, 2014 at 9:40 PM, Tom Hargrave <thargrav@hiwaay.net> wrote: I'd say that the VANAGON is no easier to maintain than any other German car made in the 80's

Whaa? You ever work on a Porsche 928? That was the most tedious car imaginable. An absolute nightmare of interconnected relays, shunts, system-interconnections. There are three full volumes on the electrical system alone, each longer than the Vangaon Bently....and the full vehicle set of manuals is 9 or 10 volumes... Even Porsche dealers refused to work on them quite often...32 valves, 4 camshafts, a serpentine timing belt turning the whole valve train that required frequent service, only accomplished by taking the whole front of the vehicle off... In order to work on anything under the car...You have to jack em up to even LOOK underneath, and then remove a full belly pan that was fastened on with a 'wonderful' assortment of fasteners types and lengths onto brittle plastic extrusions and inserts, most often completely mangled and screwed up by previous mechanical attempts...

The 944 Porsche was also a pain in the butt, but only about half as difficult as the V8 928....still about 10 times harder to service than the Vanagon. The 993 (a 911 Porsche variant) was probably not unlike working on the Vanagon, other than having a lot more performance packed into a vehicle half the size and weight...Anyone who's worked on a WBX motor would be familiar with the problems inherent in the 993....but in the vanagon, you just put a wrench on it and go....in the P-cars, you must first disassemble a significant portion of the vehicle in order to get that wrench on whatever you are trying to maintain....

The Vanagon IS a remarkably user-friendly vehicle to maintain.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.