Thanks Mike, Ken and Mark. I was just getting ready to order the stainless version of the coolant manifold "junction" and was considering an aluminum thermostat housing too. I made a "temporary" repair to the existing thermostat housing (image: http://tinyurl.com/o4a97jp ) which is holding fine, no leaks, but that part should obviously be replaced. The issue for me up here in Canada is down time with shipping so it's best to nail down all the parts I'll need before opening things up. The Vanagon runs ok as is. This 2.1 seems to have life left in it. Having nicer upgraded parts on it may help resale value should I sell it while it's still in good shape. Neil. On 5/20/14, mark drillock <mdrillock@cox.net> wrote: > I agree and would say that the black plastic parts near the heads are > the larger peril. Inspect the 4 ends of the long pipes and deal with > them as needed but REPLACE the black multiple hose junction near the > right head and the black thermostat housing assembly on the left head. > In addition if your engine has the black plastic single hose piece(s) on > the right head below the alternator then get new metal ones for those. > > Mark > > Mike B wrote: >> I'm sorry to have to tell you this, but, there's a lot more plastic >> parts in your cooling system than just the long pipes. >> I've had a coolant tower on the right front head pop a factory-glued
-- Neil n Blog: tubaneil.blogspot.ca '88 Westy http://tinyurl.com/c8rlw6p '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG *Gas* inline-VR Engine Swap Group: |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.