Date:         Tue, 20 May 2014 20:37:17 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Syncro coolant dist. Tower,
              was Re: WBX Plastic Coolant Pipe Inspection
Comments: To: Ben <syncro@GMAIL.COM>
In-Reply-To:  <E1C12505-958F-4403-8659-EF6087968AA7@gmail.com>
Content-Type: text/plain; charset=us-ascii

I was at the local cnc place the other day picking up some work. They were unloading some aluminum bar stock, 1.5" square or there abouts. Turning it into picatinny type rails with a wrap down, almost around. You know, for some sort of lead chucking device. Anyway, the making meant about 80% of the aluminum would be turned into chips. I thought hey, with a big enough cnc mill,  and bar stock, I could make a vanagon shell.

Cool, well cold, eh?

Alistair



> On May 20, 2014, at 6:36 PM, Ben <syncro@GMAIL.COM> wrote:
> 
> You clearly don't know about Bell Industries. I heard they might be prototyping a billet aluminum Vanagon replacement body.;-)
> 
> 
> BenT
> sent from my electronic leash
> 
>> On May 20, 2014, at 6:15 PM, Stacy Schneider <vwcrewman@GMAIL.COM> wrote:

>> 
>>  Buy a S S piece new from you Fav vendor and put your creative juices to something you can't buy .