Hey, inspired by some of your awesome upgrades that I have heard about, and I came across some flexible LED light strips, I was going to give it a go.
These strips work on DC, so it should be easy wiring. A couple of questions: Thinking of putting the strip under the metal strip on the edge of the top bunk. Good place? Thinking of either wiring into the galley light, turn both on and off with the same switch. Or wire it down into the cabinet and into the original fridge wiring that is now open since I replaced the fridge. What are your thoughts? What size wire should I use? Thinking about adding a strip outside the slider so we have some lights at night. Any thoughts on that? Not sure how go wire around to the Aux. Suggestions? Thanks in advance! Jeremy and Lola('87Westy) Sent from my iPad |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.