Date:         Fri, 6 Jun 2014 18:19:25 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Use These Spring Clamp Pliers?
Comments: To: Mike B <mbucchino@charter.net>
In-Reply-To:  <5392601C.10002@charter.net>
Content-Type: text/plain; charset=UTF-8

Thanks guys.

Thought I'd go for a known good brand (Knipex) over the other but the
latter does seem to be the better tool. I know that type of tool has
been referred to here before.

I plan to reuse all the spring clamps and even saved all the spring
clamps from my Jetta engine. Irony (proof?): the one clamp, so far,
that is a PITA, is a worm gear type on a hose between oil cooler and
metal pipe (IIRC). It wouldn't budge but with the coolant pump off, no
problem I'm sure.

Neil.

On 6/6/14, Mike B <mbucchino@charter.net> wrote:
>    The OE spring clamps are superior to the screw clamps.  They
> consistently apply clamping pressure, regardless of age, hose condition
> and temperature fluctuations.
>    I had to buy a remote cable operated special spring clamp pliers just
> to change all the hoses on my stock '87 Westy.


--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej