Date:         Sat, 14 Jun 2014 19:27:57 -0600
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: windshield washer reservoir?
Comments: To: Jeff Palmer <jpalmer@MYMTS.NET>
In-Reply-To:  <BLU436-SMTP67A779E23A5894751B83BBB8140@phx.gbl>
Content-Type: text/plain; charset=us-ascii

                Jeff

        There is a LargeRubberGrommet where the FillerNeck fits into the MainBody of the Tank & they Get Old&Loose so when you

fill the Tank AllTheWay ToTheTop of the FillerNeck you Loose all the Fluid that is above that Grommet ~ Makes a PrettyBigPuddle

on the ground ~ So 1st just drop the Tank to check to see if it is really Empty or Full ~ MostProbably there won't even be a need

to Unscrew the Ring that attaches the Neck to the Floor as they will (again, MostProbably) just separate & the Tank will drop ~

        If it is the Grommet that is leaking & you are able to find a New1 let me know as I also need 1 ~

                                                                                                        ORR ~ DeanB

On 14 Jun , 2014, at 4:19 PM, Jeff Palmer wrote:

> Hi list - windshield washer fluid pretty much runs through when adding.  Haven't looked too closely yet - is it difficult to swap?
> 
> Can't find them listed on any vendor site - any suggestions?  For an 85.
> 
> Thanks
> Jeff