On the back of the speedometer a small branch of the blue foil plugs into the dynamic oil warning circuit board. Unplug that connector, bend the outer most pin of the group of 4 slightly over toward the end, push the connector back into place making sure it misses the bent aside pin. Mark Zeitgeist wrote: > My buzzer is going off all the time now, and it's driving me crazy. I > don't have time to troubleshoot the wiring harness, and it seems moot since > I've got an ALH waiting in the wings. I just need the WBX to hold out for > another month or so while I remodel my kitchen, which requires plenty of > hardware errands and such. I have a functioning oil pressure gauge that I > watch religiously, so I know the pressures are well within spec. It was > going off before I installed the gauge and new switches, so it's either the > wiring or the control unit. Is there a way to just unplug the thing > without negatively impacting other functions? > > -- > Casey > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.