Date: Fri, 27 Jun 2014 18:47:01 -0500
Reply-To: JRodgers <jrodgers113@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: JRodgers <jrodgers113@GMAIL.COM>
Subject: Re: AC Removal
In-Reply-To: <1403901519.78044.YahooMailNeo@web185002.mail.gq1.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Works in cooler or drier climes - but in Alabama, Georgia, Mississippi
and North Florida - in the summertime by the time you got to your
destination you would be parboiled!
John
On 6/27/2014 3:38 PM, Michael Magnani wrote:
> I permanently removed my entire A/C system from my 90 Westy for the same reason: it always leaked refrigerant and even when it was properly serviced, never worked all that well. Removing the compressor has made working on the engine a lot easier and I turned the space where the evaporator lived into a nice additional storage cabinet.
> Mike M
>
>
> On Friday, June 27, 2014 5:48 AM, Steven Shelton <shelton4@GMAIL.COM> wrote:
>
>
>
> I don't plan on reinstalling the AC. When I bought the camper new, the AC
> was only slightly better than open windows. Years ago, when the freon
> leaked out and the technician said the leak must be somewhere in the
> cabinetry, I just did without. My rationale was that an enclosed, air
> conditioned environment just separates you from the travel experience. The
> windshield becomes a TV screen for a travelogue. Of course, when we were
> in west Texas last month traveling into the afternoon sun with the
> temperature at 102 (103 inside the cab), my rationale seemed pretty
> irrational.
>
>
> On Thu, Jun 26, 2014 at 9:39 PM, Keith Hughes <keithahughes@yahoo.com>
> wrote:
>
>> Steven,
>>
>> You're right. You have to drop it down, then tilt it down towards the
>> passenger side. You have to first reach inside and either disconnect the
>> condensate lines from both sides of the drip pan (I don't recommend that)
>> or pull both tubes up and into the evap housing cabinet. Then while
>> supporting the evaporator and fan housing, remove the cabinet. This is a
>> PITA alone, but doable (i've used a bar stool and hydraulic jack sitting on
>> the engine cover to prop up the cabinet). Much easier with another pair of
>> hands. The evap/fan housing is very brittle, and loves to crack, so you
>> need to be careful. You can't support it from the support brackets because
>> the evap fan makes it super front-heavy. I've just used the bar stool and
>> boxes stacked to the right height to support it while disconnecting the AC
>> lines.
>>
>> Last year I made a number of mods to my A/C system, including a new A/C
>> cabinet, but one thing I did that you may consider is to fully enclose the
>> Evap housing (bottom), reinforcing with aluminum angle on the perimeter,
>> and adding a front bracket for the housing. Now it's self-supporting, and
>> the cabinet can be pulled without disturbing the evap housing. pmail if
>> you want pics of the mod I did - wasn't that difficult.
>>
>> Keith Hughes
>> '86 Westy Tiico (Marvin)
>>
>>
>> Date: Thu, 26 Jun 2014 18:15:24 -0400
>> From: Steven Shelton <shelton4@GMAIL.COM>
>> Subject: AC Removal
>>
>> I need to remove the closet of my 1985 Westfalia for some
>> rear corner
>> bodywork. Of course, I have to remove the air
>> conditioner cabinet to get
>> the closet out. I've started removing the AC cabinet
>> but it looks like the
>> evaporator, evaporator housing, and fan will all come out
>> with the cabinet.
>> But I can't get to the refrigerant hoses to disconnect them
>> before the
>> cabinet comes down. Bentley isn't clear on this, and
>> what they describe is
>> different from what I have anyway. What do I need to
>> do to keep everything
>> from crashing down at once?
>>
>>
>
|