Date: Sat, 5 Jul 2014 16:56:15 -1000
Reply-To: "SDF ( aka ;jim lahey' - Scott )" <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "SDF ( aka ;jim lahey' - Scott )" <scottdaniel@TURBOVANS.COM>
Organization: Cosmic Reminders
Subject: Re: DOKA VIN Decoder mystery
In-Reply-To: <49F578A5-36D7-430A-B876-EDEB6B402950@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
This 'almost' sounds like the Syncro Doka the owner and I have for sale.
( located Southern OR ...$ 15,500 ..it's on thsSamba I believe. )
re ZZZ Vin ..
this might be helpful.
This is a Canadian model that the current owner purchased in Calfifornia
and had it towed to me in So. Oregon.
I put in a 1.9 TD AAZ engine ...a pretty tight one too. I used a diesel
vanagon bell housing and 82 engine bars , modified slightly to lower the
engine to 'syncro' lower height .
I used a Honda airbox , mounted behind the left tail light.
The engine cover was always missing ...the owner was happy to have me
just toss on a piece of plywood.
about VIN's ..
I got the van with no dash at all. It has an 87 Dash in it, and no Dash
Vin Plate ( if I remember corectly, I will be with this doka in a week.,
to sell it. No buyer yet that I know of ...I will be there with the
signed title for part of July and a little of August.
The VIN tag on the door frame shows it's a Canadian model, and that VIN
matches the clean Oregon title's VIN.
the 'body VIN' ..underneath by the jacking point .
That has the ZZZ's in it.
When I went to register and title the rig in OR for the owner ..I knew
the Or DMV would say I had to go see a State Cop or someone for a VIN
verification.
I did, driving it up to Grants Pass ....oddly ...the state cop who
does this works in a shop at ODOT .Oregon Dept of Transportation ..the
highway fixer people.
We have a fun ole time....with a VW like this you will very commonly
run into people telling you how they were in the Air Force in Germany
back in the 80's and had one, or saw them ..blah blah blah.
The cop is like that. He looks carefully at the VIN down below ...the
title, and the door frame VIN ..
and writes up that the lower frame VIN is 'a derivative' of the
Driver's door frame VIN ..
and all is kosher.
It's been titled and registered in Oregon the last 3 or more years.
I've just kept it alive and happy in all that time...
it's probably only drive 60 miles in the last 5 years. It runs great
too.
let me know if interested in purchasing it.
Scott
On 7/5/2014 4:21 PM, Ben wrote:
> Here's a more complete breakdown. First thing I would question when I see a 'ZZZ' VIN is to ask about import paperwork and title to the vehicle.
>
> VIN: WV2 ZZZ24 2 F G 097858
>
> W = Germany (Country of Origin)
>
> V = Volkswagen AG (Manufacturer)
>
> 2 = Address (Wolfsburg/Hannover)
>
> Z = Character filler in EU only
>
> Z = Character filler in EU only
>
> Z = Character filler in EU only
>
> 24= Transporter (Pickups & Multivan)
>
> 2 = Check Digit
>
> F = Model Year 1985
>
> G = Steyr/Graz Austria (plant)
>
> 097858 = Sequential Number
>
>
>
>
>
>> On Jul 5, 2014, at 4:13 PM, TJ Hemrick <x53gunner@GMAIL.COM> wrote:
>>
>> All,
>> Someone passed me a VIN (WV2ZZZ242FG097858) but I'm wondering a few
>> things:
>>
>> 1. Position 3: Shouldn't DOKA and SINKA's all be a "1" (pickup truck) as
>> opposed to a "2" which is for MPV (Multi-purpose Vehicle)?
>>
>> 2. Position 4 says it's a camper from 1980-91
>>
>> 3. Position 5 should be either A, B, or G so it's completely wrong
>>
>> 4. Position 6 is also completely wrong as it's just to show passive
>> restraints
>>
>> 5. Position 7&8 seem correct as 24 is the code for pickup (which makes me
>> wonder about my question about position 3.
>>
>> 6. Position 10 for the year could be right as it say's it's an 85. It
>> does have the round headlights.
>>
>> 7. Position 11 for the assembly plant it was made at should be right
>> showing as Graz Austria for a Syncro
>>
>> That ZZZ portion is really the issue. Anyone have an insight or thoughts
>> on that, I'm all ears.
>>
>> I did not see the VIN plate or door jamb personally (it's a reapaint
>> anyhow) so I can't vouch for anything first hand. It's a DOKA (if you
>> hadn't already seen that) so it's a Canadian or European model and still
>> has the Kilometer Speedo. Not that this helps but it's a Three door, Bench
>> seats front and back, and it's gas. Very weird air box looking thing in
>> the pictures sent to me. I don't remember seeing a metal looking air
>> cleaner type device over the top of the engine when I was driving those
>> thing in Germany while I was in the service. Of course, we didn't have
>> Syncro's either...If you experts care to chime in on that metal device
>> (reminds me of the old oil bath can on type 3 Fastbacks but flatter and
>> thinner), please do. Until I can see it first hand, I'm lost on that one.
>>
>> Pop quiz: Anyone know why VW would put that piece of square over as an
>> engine cover (and raised up above the rest of the bed-weird) when they
>> could have just used a metal lid from a tin top? I'm thinking (as I type
>> this) it couldn't hold the weight but man, if that's the case, the wood
>> cover was an aberration...
>>
>> Anyhow, Thanks in advance for all your insights.
>>
>> TJ
|