That harness did not melt without cause. I would still investigate wiring problems including something connected wrong. The circuits for fuel, ignition, and starting are not fused. Dennis, From my phone. ________________________________ From: Richard Golen<mailto:rgolen@HOTMAIL.COM> Sent: 7/13/2014 7:58 PM To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM> Subject: Real starter problem solved, wiring harness needed - Short Version Hi, My starter problem from last week all boiled down to a melted wiring harness. I now need the main wiring harness that runs along the front of the engine compartment to the idle stabilizer, throttle switch, injectors and idle stabilizer relay, and then to the other side of the engine compartment and beyond to the ECU. Anyone have a spare harness they want to sell? I need, at minimum enough to splice to the left side of the engine and to the ECU. Ric Sent from my iPad |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.