It was a short somewhere in the harness keeping the solenoid wire hot in the on position, but not with enough current to throw the solenoid, just enough to hold it. Ric ran a new wire from the switch to the solenoid. Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Karl Wolz Sent: Thursday, July 10, 2014 8:50 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: $100 Reward Results So, what was the final fix? Karl Wolz Sent from my electronic umbilicus > On Jul 10, 2014, at 8:14 AM, Richard Golen <rgolen@HOTMAIL.COM> wrote: > > Dear List Members, > > My starter problems have been resolved thanks to the help of Stuart, Dean, Mark and Scott. Their advice helped to narrow down the issues and led to the fix. > > Each of the four have agreed to allow me to donate the $100 to the Vanagon PIF fund. The donation has been made acknowledging their help. > > Thanks guys! > > Ric > 87 Weaty > > Sent from my iPad |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.