Point taken. I used the term "isolator" loosely and ignorantly, but meant to convey that AFAIK, the contactor I'm using is ok for the job. But maybe I stand to be corrected on that point too? ;) Neil. On 7/31/14, Dennis Haynes <d23haynes57@hotmail.com> wrote: > Let's not confuse isolators (diode devices) with relays or contactors. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Neil N > Sent: Thursday, July 31, 2014 6:02 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Battery isolator question > .... the "old school" "can" type isolators -- Neil n Blog: tubaneil.blogspot.ca '88 Westy http://tinyurl.com/c8rlw6p '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG *Gas* inline-VR Engine Swap Group: |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.