Date:         Thu, 21 Aug 2014 12:41:45 -0600
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: WTB: EVAP charcoal canister
Comments: To: Neil N <musomuso@GMAIL.COM>
In-Reply-To:  <CAB2Rwfi1JHhO=R1LtfAgc1-_eXPoUVdEnyqoBbCdxUy8LwZ4pg@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

                Neil

        The Bracket is not AbsolutelyNecessary but it does seem to me to make for a nice

installation ~ With the Bracket the SubyEvapCan can be mounted on the FrameRail near

the location of the Orig' ~ Have not done mine but have seen Pic's ~ But have also seen 

Pic's of the SubiCan being mounted in the same location as the Orig using a Large Hose

Clamp ~

                                                        ORR ~ DeanB

On 21 Aug , 2014, at 11:45 AM, Neil N wrote:

> Appreciate that tip Scott. I'm sure others will too. This simpler type of
> charcoal canister doesn't appear to be "rocket surgery" level in terms of
> function. My hope is that the vw part I bought fits the vanagon bracket.
> 
> Is the Suby canister bracket required if one retrofits that canister to a
> Vanagon?
> 
> 
> On Wednesday, August 20, 2014, SDF ( aka ;jim lahey' - Scott ) <
> scottdaniel@turbovans.com> wrote:
> 
>> Subaru ones can work too ..
>> they are often 'right there' in the engine compartment ..
>> say 90's era Legacies.
>> 
>> 
>> On 8/20/2014 9:12 AM, Neil N wrote:
>> 
>> ......
>> Scavenged a charcoal filter off a 94 Jetta. Part number 171 201 813
>> 
>> 
>> 
> 
> --
> Neil n
> 
> Blog: tubaneil.blogspot.ca
> 
> '88 Westy http://tinyurl.com/c8rlw6p
> 
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
> 
> Vanagon VAG *Gas* inline-VR Engine Swap Group:
> 
> http://tinyurl.com/d7gd5ej