Date:         Sat, 23 Aug 2014 12:32:21 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: WTB: EVAP charcoal canister
Comments: To: "SDF ( aka ,jim lahey' - Scott )" <scottdaniel@turbovans.com>
In-Reply-To:  <53F7D120.9020508@turbovans.com>
Content-Type: text/plain; charset=UTF-8

My 88 2.1 WBX is like that; no connection from canister to air cleaner.
But your comments remind of how the bottom hose on canister could get
clogged.
I'm enjoying my trip too much to pull the wheel and have a closer look at
the canister etc.
;)
It's running ok.

The Jetta Motronic canister purge valve is a solenoid type switched open,
closed by the ecu.



On Friday, August 22, 2014, SDF ( aka ;jim lahey' - Scott ) <
scottdaniel@turbovans.com> wrote:

>  I think if you look at a Legacy Subaru you'll see a simple bracket
> affair.
> Unbolts easy if I remember correctly.
>
> but no, larger diameter so will not fit
>

.........


>
>
> vanagon is controlled by vaccum port that opens when throttle is opened I
> believe..
> Subaru by vacuum switching valve .
> and it can be plumbed and controlled like it was on a vanagon.
>
> a few interesting things I've noticed..
> on a 1.9 wbxr the source of the of fresh air that gets drawn into the
> bottom of the evap canister is on the engine side of the air filter where
> it should be....clean air there.
>
> Some 2.1 air boxes have a similar fitting ...but I've never seen one
> used...just capped off.
> most 2.1 air boxes don't have that fitting ..
> the 2.1's I've really looked into get their clean air to enter the bottom
> of the evap canister from an open hose stuck into a frame rail, and thus
> not filtered.
>
>



--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej