Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2014, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 31 Aug 2014 17:24:24 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Terminal/connector source was Fridge on 12V
Comments: To: Rocket J Squirrel <camping.elliott@GMAIL.COM>
In-Reply-To:  <540327D5.7040608@gmail.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 09:49 AM 8/31/2014, Rocket J Squirrel wrote: >I'm gonna chop off that cigar lighter plug about 6'' up the wire and >terminate the cooler's cord into a pair of Powerpoles. Then wire up a >cord that goes fairly directly to the battery so the cooler gets a good >low-resistance feed for +12, and make a second cord that terminates in >the cooler's old cigar lighter plug so plugging the cooler into a cigar >lighter is still an option.

Cigar lighter design is very good** for self-releasing cigar lighters and I applaud the clever design that went into it. But I hope (and expect) that the designer is spinning in his grave over the way his design is being prostituted today, using a non-wiping contact against what should be the mounting rivet for the actual B+ self-releasing terminal. I almost wish the things caught fire more often so that insurance companies would have a reason to pressure them out of existence. </rant>

Here's an interesting source for OEM-quality connectors, crimp terminals, fuse boxes and tools; worth checking out and supporting if possible IMO. Aimed toward motorcycles, but lots of application for us.

http://www.cycleterminal.com/crimp-tools.html http://www.cycleterminal.com/about-me.html http://www.cycleterminal.com/crimp-tool-help.html http://www.cycleterminal.com/headlight-harness-install.html http://www.cycleterminal.com/fuse-boxes.html http://www.cycleterminal.com/terminal-kits.html http://www.cycleterminal.com/sae-connectors.html http://www.cycleterminal.com/motorcycle-connectors.html http://www.cycleterminal.com/flag-terminals.html http://www.cycleterminal.com/spade-terminals.html http://www.cycleterminal.com/terminal-sleeves.html http://www.cycleterminal.com/sleeve-tubing.html http://www.cycleterminal.com/index.html

Yrs, d


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.