On Sat, Sep 13, 2014 at 7:12 AM, Roy Nicholl <RNicholl@nbnet.nb.ca> wrote: > Brett, > > I've used both Rust Mort {i.e. Rust death) and Restoleum Rust Converter > for years with not issues. There is also one called "Extend" - which cannot > be found here - which you could use. > > I always remove paint and take the metal back as far as I dare before > applying it - The obvious exception here being the seams on the Vanagon > ... here, after cleaning out the seam, I simply injected it using a syringe. > > > Okay, I'm sold. I found a store not too far away that sells Rust Mort. After you inject it into the seams, do you rinse it off after a bit of waiting? How long do you let it dry before applying seam sealer?
-- Brett in Portland, OR "Albert" '82 VanaFox I4 Riviera |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.