Date:         Fri, 12 Sep 2014 11:45:41 -0500
Reply-To:     ddbjorkman@VERIZON.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Bjorkman <ddbjorkman@VERIZON.NET>
Subject:      Shifter clik
Content-type: text/plain; charset=UTF-8

I started getting a click from my shifter when going into gear. '87 Westy.  Not a grind, sounds like down in the linkage box below the front floor, I don't think the noise is being transmitted from somewhere else, no problem getting into gear with no additional pressure, it just makes a click when going into gear. BTW, not long ago, the late '87 boots were added to the linkage.  I decided to remove the box around the shift end under the front floor to check things out.  There are 2 bolts on the driver side of the box, as well as the 4 nuts that hold the box on.  What are the 2 driver side bolts and what do they hold?  It's hard to look in from the back to see what they are.  I don't want to remove them and have my shift rod (or something else) fall off (with additional adjustments later).  Bentley is kinda vague on what those bolts go to.

Dave B.