Measuring my Brembo disks with a cheap vernier caliper. These are for Syncro "big" brakes. Diameter 278 mm Hub 67mm Hat height 27mm Disk thickness 24mm Part # 251.407.615Q
Chris. Wysłane z iPhone'a Dnia Sep 16, 2014 o godz. 8:53 Chris S <szpejankowski@gmail.com> napisał(a): > Sometimes manufacturers post their rotor dimension on the internets. I found a reference to an Audi part 121.33021, diameter 276mm, nominal thickness 24.9mm, hub size 68mm, height 46.3mm. I have a pair of SA brakes in a bin patiently awaiting installation. I should be able to measure them if you give me a day or so. > > 2014-09-15 18:02 GMT-04:00 Ben <syncro@gmail.com>: >> Hello Folks, >> >> Has anyone ever substituted an Audi 200/5000 disc in place of the South African big brake kit discs? Theoretically, they should be similar enough but I've never replaced one to be able to say 100%. >> >> >> TIA, >> >> BenT > > > > -- > Chris S. > "Old Farts don't learn, they argue. Don't be an Old Fart" > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.