Date:         Sat, 27 Sep 2014 10:48:38 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Coolant Pump: wear at case
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY406-EAS3183A0FDE163963B9B5F8E7A0BC0@phx.gbl>
Content-Type: text/plain; charset=UTF-8

Cool. Thanks for the Devcon suggestion Dennis.

Part of the reason I hesitate to do the repair is that I'm installing
a new radiator
as part of this project. I didn't measure wear at the half moon face
but would guess it's about 1 mm.

I'll be curious to see what West Systems response is to Stevens email.

Neil.


On 9/27/14, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> A good metal filled epoxy will do the job well. Check out some of the Devcon
> products.
>
> As for not causing a problem I have fixed many an overheating problem by
> fixing this area. If engine out for major repair I get it welded.


--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej