Last summer a mechanic by-passed my front Heater Core due to a small leak. I have installed a new heater core and fan motor+ wiper motor Just to be proactive. My question is which heater hose is the feed hose and which is the return hose? While laying down with the radiator fan above me I see two hoses along the frame rail and a open hose from the new Heater Core with the valve beside it open as well. So which Hose along the frame rail is the feed hose, the outside Hose or the inside Hose? Which Hose goes to the Heater Valve? Thanks, Bill Witz 84 Tiico Doing my part to keep this Westy on the road. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.