Date:         Sat, 4 Oct 2014 11:45:39 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Pop too install 81 with staples
Comments: To: David Parsons <bugnut1@comcast.net>
In-Reply-To:  <3A9627EA-8F6C-4DFB-B890-38A067F4D9DE@comcast.net>
Content-Type: text/plain; charset=UTF-8

I installed my staple type canvas with pop top still attached to
Vanagon. These pics may not be of use but may have some helpful hints.
https://picasaweb.google.com/musomuso/1981WestfaliaCanvasReplacement#

I used the original canvas "marks" as a guide and measured the old
canvas against new. The new canvas edge is installed close to the
plastic strip edge, upper and lower edge has a "lip".

My canvas is a "tight fit" German tent from van-cafe.
I may have mounted it too high at the wood strips; it's tight! But
it's holding up ok.
I tacked the tent to the side wood strips to get a rough idea of
whether or not the canvas had enough length to attach properly under
the lower strips.

If working in colder weather, *warming* up the plastic strips with a
heat gun will help you get staples in. Warning: the strip heats up
QUICK !

On 10/4/14, David Parsons <bugnut1@comcast.net> wrote:

> I just bought a new canvas for BD. OG style. I'm doing it off the VANAGON.
> It's an 81 with staples.Anyone know how  much canvas to fold over at the
> top. I do t want to have to install take apart and reinstall. I'm planning
> on just folding the width of the plastic strip. Any one have any experience
> with this top install? Thanks, Dave
>
> Sent from my iPhone


--
Neil n

Blog: tubaneil.blogspot.ca

'88 Westy http://tinyurl.com/c8rlw6p

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG *Gas* inline-VR Engine Swap Group:

http://tinyurl.com/d7gd5ej