Date:         Tue, 14 Oct 2014 10:46:26 -0400
Reply-To:     Ryan Perry <rjdperry@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ryan Perry <rjdperry@GMAIL.COM>
Subject:      Vacuum System Parts on 1.9 - "Y's" and Constrictors...
Content-Type: text/plain; charset=UTF-8

So while I am redoing my TB/Plenum I am double checking vacuum lines. I
found the 4mm at FLAPS and am zip tying every connection and all seems
tight and good to go with a few exceptions. (I had redone this before
tearing down so driven the van and all seeemed in order)

1) I broke the plastic "Y" that connects a large vacuum hose that comes off
the passenger side of the air plenum that has a small hose coming out the
side. It was pretty brittle, and I was heavy handed. I have it duct taped
together but can't imagine that being a long term fix. I am having issue
finding the part, anyone know where it might be available or the sizing of
the large vacuum tube so I can find something non VW?

2) I was reading in the manual about a constrictor in the small vacuum line
right after the "T" that plugs into the back of the air plenum. Looks like
right after the T the constrictor headed towards passenger side. I had
replaced this with a FLAPS "T" and ran the van and didn't seem to notice
any changes beyond the off idle bog I have been hunting down. Anyone know
if this is absolutely necessary or how to get one?

As always, thanks for your help and guidance!
Ryan
Asheville, NC
Artie McPartie the 1.9 '84


Ryan Perry