Date:         Tue, 21 Oct 2014 12:53:54 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: 2.1 WBX Noise Is?
Comments: To: "Chris S." <szpejankowski@gmail.com>
In-Reply-To:  <C0F439CB-36B7-4826-B5C0-4938C64F7915@gmail.com>
Content-Type: text/plain; charset=UTF-8

Good tips folks. Thanks.

If I view it again, I'll listen with an appropriate tool and if
possible, record the sound and post it online.

The owner did take it to a knowledgable Vanagon repairman who took a
very brief, if any, listen to it and was quick to suggest a rebuild.
My "ears" are pretty good but then I don't have a lot of experience
with the various sounds a WBX can make. I think it's wishful thinking
on my part to gamble on the noise being limited to the valve train
beyond any cam bearing issue.

Neil.

On 10/21/14, Chris S. <szpejankowski@gmail.com> wrote:

> Take loooong screwdriver, place the pointy end against water pump housing
> and put the handle firmly against your ear opening.  It will look and feel
> strange, but it will transmit noises directly from the housing. Then you can
> have a little more fun and try other areas of the engine block.
>
> You can also remove the drive belts and start it up to quickly see if water
> pump, alternator or AC compressor, if present, are the culprit.
>
> Chris.


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>