Date:         Sat, 8 Nov 2014 10:00:24 -0800
Reply-To:     Jim Arnott <jrasite@EONI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Arnott <jrasite@EONI.COM>
Subject:      Re: Recent experience with vehicle delivery services
Comments: To: Stuart MacMillan <stuartmacm@GMAIL.COM>
In-Reply-To:  <020101cffb75$91af3d80$b50db880$@gmail.com>
Content-Type: text/plain; charset=windows-1252

You bring it in through the doors (about 18” square) on the sides or the smaller ones on the front and back. 

Go here and scroll down a bit: http://en.wikipedia.org/wiki/Fiber-optic_communication

Jim

On Nov 8, 2014, at 9:00 AM, Stuart MacMillan <stuartmacm@GMAIL.COM> wrote:

> Uh, how do you get the cable out of the trailer when it's spliced?  Dumb
> question, but inquiring minds want to know.
> 
> Stuart
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Jim Arnott
> Sent: Friday, November 07, 2014 9:03 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Recent experience with vehicle delivery services
> 
> Thank you all.  In the end, the boss is getting in his pickup and driving
> from NE Oregon to Ft. Worth, TX to tow the fiber splicing trailer back. All
> the delivery options were about $1500 over the cost of doing it himself.
> 
> Since it's Friday,  I can link to the new acquisition:
> 
> http://www.truckertotrucker.com/listings/251675.cfm
> 
> Way better that the tent we're currently using. (Splicing fiber in a tent
> sucks. Here, the only time that the temperature is bearable, the wind's
> blowing 40 mph. The rest of the time it's either 90 degrees or 20 degrees.)
> 
> Thanks again.
> 
> Jim=