Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2014, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 19 Nov 2014 13:13:36 -0500
Reply-To:     "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject:      Re: A/C problems
Comments: To: ddbjorkman@verizon.net
In-Reply-To:  <16406379.21080.1416413415440.JavaMail.root@vznit170060.mailsrvcs.net>
Content-Type: text/plain; charset=UTF-8

We had a mystery leak on a customer's van that we couldn't find until we dropped the overhead unit (not a westy but the same under the skin). It was at the expansion valve. The later vans have this aluminum block one that I thought could never go bad. However they epoxied the unit together and over time the epoxy gives up. The part that looks like a hat on the top was separating from the lower part. After we replaced that, the system has been holding pressure and working great. We have these expansion valves on our site for not much money. Let me know if you need one or if I can help you in any other way. In a westy you are going to have to take apart the overhead cabinet to replace this valve. That is why most folks don't check there.

Ken Wilford John 3:16 www.vanagain.com

On Wed, Nov 19, 2014 at 11:10 AM, David Bjorkman <ddbjorkman@verizon.net> wrote:

> Hi All; > I'm having A\C problems. I have a 87 Westy with a FAS Gen V engine with a > new compressor, lines, etc. When I started to lose pressure I had dye put > in the system to try to find the leak. The problem has gotten worse with > time. When checking for dye, none could be found in engine bay, lines, > front radiator or any place I could see. I am worried that the problem is > in the overhead cabinet where nothing was done (ie: just connected new > system to it, after flushing etc.). I have heard that replacement parts for > that part of the system are hard to find. Can someone give me an idea of > what's in there that can and cannot be replaced with new parts? Info on > where one can find them, especially the condenser, would also be helpful. > > Dave B. >

-- Thanks, Ken Wilford John 3:16 www.vanagain.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.