here's another tip I did few years ago... - in advance position the door pocket on the door panel to where you want it, put some chalk marks for positioning - take some screws and put them on the door pocket - dab some latex paint on the head of the screw - position the door pocket on the chalk marks and press - the paint will leave marks for drilling the holes - drill the hole on paint marks - remove the screws and attach the door pocket from the other side of the door panel. - do not force on the screws because the screws bosses may brake - if they do then use JB Weld to fix :-) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.