Date:         Mon, 24 Nov 2014 13:54:39 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Securing table
Comments: To: Stan Shapiro <mail@stanshapiro.com>
In-Reply-To:  <001a01d0082f$0e2d4f80$2a87ee80$@stanshapiro.com>
Content-Type: text/plain; charset=UTF-8

you're welcome Stan.

There's likely better ways to secure the table. Glue emery cloth to
"clamp" in cabinet at table post? This table mod I did:
https://picasaweb.google.com/musomuso/WestyFixes (a variation on the
table height mod) made my bungee solution viable.

Just my .02 but I won't be doing this mod on my '88. Not only because
of the fabric on pillar but because of the stock table height; the
reach of the bungee would be too long. But.... I think something else
less flexible could be rigged up. Flat piece of stainless steel with
hinged hook at lower end that would slip over table arm?

I'm mostly kidding now, but maybe there's a huge market for a widget
one could use on buses w/o pillar fabric?

Felder - Bell Industries joint effort?     ;)

Neil.

On 11/24/14, Stan Shapiro <mail@stanshapiro.com> wrote:
> Neil,
> Got it!  Thanks for explaining.  Yes I do have fabric, and I can feel the
> hole underneath the fabric.
>
> Thanks
>
> stan
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Neil N
> Sent: Monday, November 24, 2014 1:27 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Securing table
>
> .... body part
> ("pillar") between windows near table.


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>